| | opcom 2008 update to opcom 2009 |             new |
| « February 2012 » | | Mon | Tue | Wed | Thu | Fri | Sat | Sun | | | 01 | 02 | 03 | 04 | 05 | | 06 | 07 | 08 | 09 | 10 | 11 | 12 | | 13 | 14 | 15 | 16 | 17 | 18 | 19 | | 20 | 21 | 22 | 23 | 24 | 25 | 26 | | 27 | 28 | 29 | | | | | | | | | | | |
| Statistics: | | Today | | | visitors | 4 | | views | 4 | | Yesterday | | | visitors | 101 | | views | 80 | | This week | | | visitors | 369 | | views | 288 | | This month | | | visitors | 756 | | views | 510 | | This year | | | visitors | 2917 | | views | 2071 |
| | Readers | 1 | | Posts | 73 | | Comments | 4 | | | View details |
| RSS |
|
| | Wednesday, 01 February 2012 Year |
|---|
 07:13 | V-Checker A302/A303 Multi-Function Trip Computer FAQ |  |
| V-Checker A302/A303 Multi-Function Trip Computer FAQ
Q: What is the application car model of the trip computer V-CHECKER A302 and V-CHECKER A303?
A: V-CHECKER A302/A303 is for the VAG, Skoda, Audi models. For example, the model V-CHECKER A302 support: Sagitar, Touran, Audi, Golf, Octavia, Magotan, Scirocco, Caddy. A303 Supported models: Polo, Golf, Passat, Bora and more.
Q: Why the driving speed displayed on the computer is lower than the car displays?
A: Almost all of the car speed displayed on the meter is not accurate, mainly at the security depot, design, 2-5% higher than the actual speed, that is someone on the freeway 140Km / h, says has not been photographed speeding, in fact, the real speed at this time is 120Km / h.
Q: Why is getting slower and slower speed but the instantaneous fuel consumption per hundred kilometers are getting higher and higher?
A: When the car is in neutral sliding, the oil consumption is not 0 as everyone thought, Look at the formula: = instantaneous fuel consumption per hundred kilometers (100 * Cumulative injection volume) / (speed * time). This time, less fuel injection engine, low speed , need to take more time if travel 100Km, when the speed is very low, the time is almost infinite. According to the formula, this time the instantaneous fuel consumption per hundred kilometers shown to be growing. Note: The instantaneous fuel consumption per hundred kilometers! = fuel injection quantity ah!
Q: Does the trip computer A301/A303 need to be upgraded, how to upgrade?
A: Generally speaking, if A301 using the normal, we do not recommend vehicle owners to upgrade, of course, we have been upgrading and improving the features of the A301 continuously. Owners can contact your local dealer to upgrade.
Q: Why setted the reminder function of shift, when the speed reaches a setted value, trip computer do not remind.
A: The shift to remind does not work under the cruise mode, only in the competitive mode will remind you.
Q: Where is the car’s OBD diagnostic interface.
A: The location of the diagnostic interface principles: take the driver as the center, radius of 0.5 meters, the driver’s reach out and touch range. The specific location of OBD diagnostic interface, there is no uniform standard. Usually under the steering wheel, at the top of brake pedal. If you still can not find the diagnostic interface, please contact your local 4S shop of the model.
Q: How to set fuel consumption factor?
A: The fuel factor is used to adjust the "instantaneous fuel consumption, the current default: 331, the coefficient is based on a complex formula and experience in numerous tests of the car. Does not advise clients to change. If the vehicle was modified or age of the vehicle too old, causing the vehicle sensor aging, drift. Customers can adjust according to their proportion of the actual situation of the vehicle. Such as: fuel consumption factor = 331 +331 * 10% = 364, the instantaneous fuel consumption is increased by 10% on the original basis.
Q: Is there any way to test V-CHECKER A302/A303 reading car fault code safely?
A: You can open your car hood, disconnect the oxygen sensor or throttle position sensor like the plug. Start the car, usually over 4-5 seconds, the engine fault light comes on, V-CHECKER A302/A303 will alarm when you open the key. And precisely shows the problem.
Q: When using the trip computer, open the key to driving sometimes the computer does not start automatically, lights flashing alternately.
A: This is because the car battery voltage is too low, trip computer into hibernation in order to protect the battery. At this point press any button to start. You can also start the car, when the voltage rise it will starts automatically.
Q: V-CHECKER A302/A303 how to display real-time fuel consumption?
A: Switch to the competitive mode, as shown in the middle of the first line of real-time fuel consumption,if you want to see instant fuel consumption, can set competitive mode to travel mode.
Q: V-CHECKER A302/A303 crash into the competitive mode, restart.
A: Upgrade to V3.24 or newest version.
Q: The outside temperature has been shown as 0. .
A: Some models (such as some of the old section Passet 2.0 model) is not configured outside temperature sensor, trip computer can not read.
Q: How do I change car settings? How to restore factory settings?
A: First tune out the hidden menu, and in the hidden menu, select [Select Model] or [Restore Factory Settings]. Bring up hidden menus. Method One: Unplug the OBD connector -> while holding down the [previous] [next] [OK] three keys -> plug in the OBD connector> display the first image -> release the button.Quickly followed by [next] [next] [last] [OK] [C] Method Two: (V3.24 or higher version) Unplug the OBD connector -> plug in the OBD connetor - "Show the first image -> quickly press the [OK]
Q:Why my car is equipped with reverse radar but do not show reverse picture.
A:A303 without reversing radar display. V-CHECKER A302 with reversing radar screen, but only support part of the original reversing radar. If the display screen did not show reversing, you'd better closed the reverse radar function in [instrument settings].
Learn more at:
http://www.uobd2.com/.../v-checker-a302-vag-multi-function-trip-computer.html
Send trackback to: http://blog.uobd2.com/.../
| | |
| Wednesday, 11 January 2012 Year |
|---|
| 10:32 | VAG5053 VW Audi scanner Operation Instructions | |
| VAG5053 VW Audi scanner Operation Instructions
1. Preparation for Testing
Memoscan VAG5053 aids in monitoring electronic and emissions-related faults in your vehicle and retrieving fault codes related to malfunctions in these systems. Mechanical problems such as low oil level or damaged hoses,wiring or electrical connectors can cause poor engine performance and may also cause a “false” fault code. Fix any known mechanical problems before performing any test. See your vehicle’s service manual or a mechanic for more information.
Check the following areas before starting any test:
1) Check the engine oil, power steering fluid, transmission fluid (if applicable), engine coolant and other fluids for proper levels. Top off low fluid levels if needed.Make sure the air filter is clean and in good condition. Make sure all air filter ducts are properly connected. Check the air filter ducts for holes, rips or cracks.
2) Make sure all engine belts are in good condition. Check for cracked, torn, brittle, loose or missing belts.
3) Make sure mechanical linkages to engine sensors (throttle,gearshift position, transmission, etc.) are secure and properly connected. See your vehicle’s service manual for locations.Check all rubber hoses (radiator) and steel hoses (vacuum/fuel) for leaks, cracks, blockage or other damage. Make sure all hoses are routed and connected properly.
4) Make sure all spark plugs are clean and in good condition. Check for damaged, loose, disconnected or missing spark plug wires.
5) Make sure the battery terminals are clean and tight. Check for corrosion or broken connections. Check for proper battery and charging system voltages.
6) Check all electrical wiring and harnesses for proper connection. Make sure wire insulation is in good condition, and there are no bare wires.
7) Make sure the engine is mechanically sound. If needed, perform a compression check, engine vacuum check, timing check (if applicable), etc.
2. Connect the VAG5053
2.1 Turn the ignition off.
2.2 Locate the vehicle's 16-pin Data Link Connector (DLC).
2.3 Connect the VAG5053 cable connector to the vehicle’s DLC. Turn
on the ignition, Press [power button], The VAG5053 will auto start,
the following screen will be displayed.
2.4 Wait a moment, the screen will auto display the main menu:
[Diagnosis system]: enter the control module selection menu.
[Contrast]: adjust the contrast.
Memoscan VAG5053 VW Audi scanner operation instructions are too long to paste all. Maybe you want to continue reading the following operation steps:
Diagnosis system, READ ECU version, Read Fault memory, ERASE Fault, Basic Setting, READ Measuring value, READ indi. value, Adaptation, Code Control unit, FND Output, Login procedure. Free download:
MemoScan VAG5053 VW AUDI Scanner Service Reset user manual
You may also like to watch video on how to use Memoscan VAG5053.
Send trackback to:
http://blog.uobd2.com/2012/01/memoscan-vag5053-vw-audi-scanner-user-manual/
| | |
| Wednesday, 04 January 2012 Year |
|---|
| 08:35 | Universal BMW and Benz key maker-Car Key Master CKM200 | |
| Universal BMW and Benz key maker-Car Key Master CKM200
Car Key Master CKM200 function, support protocol and highlights
Multi-functions: Integrate functions such as key information reading, data calculating, and key programming and is applicable to both old and new models for Benz and BMW.
Support K & CAN line: car key master can be operated via OBD socket, CAN or K line on many models without disassembly.
Easy operation: Graphical workflow makes it easier for your operation.
Both PC and handset models for your choice.
Multi-functions ----Integrate functions such as key information reading, data calculating, key
writing, and is applicable to both old and new.
Easy operation ----Graphical workflow will make it easy for your operation.
Whats more, our Car Key Master can be operated via OBD socket, CAN or K line on many models without disassembly.
High security G3 platform ----Besides USB communication and online update, our G3 (the third generation) platform is especially featured by its high security: hardware anti-cracking and software anti-copying, adopting IDEA (International Data Encryption Algorithm) for registration, upgrade and payment.
Bran-new keys ----We will cooperate with German technology, and launch the bran-new keys for all the BMW and Mercedes Benz. At that time, you can get rid of the key shortage and no need to use any renovated second-hand keys.
Vehicles List
What car models Car Key Master CKM200 supports?
Car Key Master CKM200 supported Benz series:
Benz S CLASS (W140.W220)
Benz CL CLASS (W215)
Benz SL CLASS (R230)
Benz E CLASS(W210.W211)
Benz CLK CLASS(W208.W209)
Benz CLS CLASS (W219)
Benz C CLASS (W202.W203)
Benz ML CLASS (W163)
Car Key Master CKM200 supported BMW series:
Old style BMW (EWS2.EWS3.EWS4)
BMW 1/3/5/6 (E87.E90.E91.E92.E60.E61.E63.E64)
series white CAS2
BMW 1/3/5/6/X
(E87.E90.E91.E92.E60.E61.E63.E64.E70)Series
black CAS2
BMW 1/3/5/6/X
(E87.E90.E91.E92.E60.E61.E63.E64.E70.E71)Series
black CAS3
BMW 7series E65.E66 CAS
| | |
| Tuesday, 03 January 2012 Year |
|---|
| 07:18 | Key tool v2.1 operating with texas instruments transponders | |
| Super key tool v2.1 operating with texas instruments transponders
Free watch SKT-100 Super key tool 2.1 driver setup instruction , after open this link, then click “video” to watch.
Free download super key tool V2.1 SKT-100 user manual.
How to operate super key tool v2.1 with texas instruments transponders
Select tab RFID-Device - Select transponder – Texas4C,4D,4E.
Software control elements (called widgets) are at the operating field of the tab:
1 – 4C transponder data field
2 – 4D/4E transponder data field
3 – transponder identification field (challenge - responce)
4 – 4C reading and recording button
5 – 4D/4E reading and recording button
6 – transponder type choice field
7 – “Smart” key reading button
8 – cryptokey searching button
To work with the Texas Instrument company transponders should install in the coil of the device, select its type in the selection field, and continue to use the write and read operations according to the technical description of tis type of transponder.
| | |
| Friday, 30 December 2011 Year |
|---|
| 10:13 | NEXIQ 125032 USB-Link diagnosis supported car models, engine | |
| NEXIQ 125032 USB-Link diagnosis supported car models, engines and transmission
Free download:nexiq 125032 usb link truck diagnosis user manual
NEXIQ 125032 USB-Link diagnosis Supported car models
1,VOLVO TRUCK: FM10, NH565, FH12, FM12, VHD, FH16, FM7, VN, WC, WG, WI, FH565, NH12, FL6, FL7, FL10, FL12, NH525, WX, COMP04, FE, VHD, FH, FM, VM, FM9, F10, F12 , F16, NL10, NL12, VOLVO BUSES: B10B, B10M, B10L, B10R, M10R, B12, B58, B6, B7R, OLYMPIAN, SUPEROLY
2,VOLVO BUS: B12B,B12M,B12R,B6R,B7L,B7R,B9L,B9R,B9S,B9TL,PREVH,PREVX,
3,MACK TRUCKS:V-MAC I, V-MAC II, V-MAC III, V-MAC IV, Service Diagnostic
4,VOLVO CONSTRUCTION EQUIPMENT (CE): Wheel loader: L110E, L110F, L120E, L120F, L150E, L150F, L180E, L180F, L220E, L220F, L330E, L350F, L60E, L60F, L70E, L70F, L90E, L90F Articulated Hauler: A25D, A25E, A30D, A30E, A35D, A35E, A40D, A40E, T450D, Excavator: EC135B, EC140B, EC140C, EC160B, EC160C, EC180B, EC180C, EC210B, EC210C, EC235C, EC240B, EC240C, EC290B, EC290C, EC330B, EC330C, EC360B, EC360C, EC460B, EC460C, EC700C, EC700B, EC700C, ECR145C, ECR235C, ECR305C, EW140B, EW140C, EW145B, EW145C, EW160B, EW160C, EW180B, EW180C, EW200B, EW210C, FC2121C, FC2421C, FC2924C, FC3329C, PL4611 Grader: G710B, G720B, G726B, G730B, G740B, G746B, G780B, G930, G940, G946, G960 , G970, G976, G990
5,Navistar: ALL Diamond Logic Builder (DLB) ServiceMaxx
6,International: ALL Intune, MD32,
7,Freightliner: ALL ServiceLink:cascadia,century,columbia,Coronado,classic,FLDSD,4900FA, 4900SA,4900EX.
8,HINO: ENGINE:300SERIES, 500 SERIES, CR03_J08E, CR03_J05D, COMMON RAIL(J05E), J05D_US, J08E_US,P11C,
VCS, Hibrid, Inverter, Brake(ABS), AT_45043LE
9,ISUZU_GMC: 1996-1999 NPR Diesel and F Series
Include, NPR/W 3500, NPR HD/W 4500, This is for 6.0L V-8 Gasoline Engines only, 7.8L 6HK1 Engine
Isuzu: NPR, NPR HD, NQR, NRR, FTR, FVR, FXR with 6HK1 LG4 Engine, NPR, NPR HD, NQR, NRR with 5.2L (4HK1) or 3.0L (4JJ1) Diesel engine. 6.0L V-8 Gasoline Engine
GM: W3500, W4500, W5500, WT5500, W5500 HD,with 5.2L Diesel Engine Only,T6500, T7500, T8500
10,SCANIA VEHICLE, KOMATSU excavator, and MAN vehicle will be update
NEXIQ 125032 usb link truck diagnosis Supported Engines
1,Detroit Diesel Diagnostic Link? (DDDL)
All DDEC VI equipped engines ,
DD13,DD15,DD16,SERIES60,MBE4000,MBE900,and RS9, RSX9-A,RSX9-B, RSX9-R, RS10, RSX10 J1939 engine brake level for Series 2000 and 4000 Engines with USA and ISO firing order selection
2, Caterpillar (on high way engine for j1939)
3126, 3406, 3306B, 3512C, C4.4, C6.6 C7 C9 C11, C13
3,Cummins INSITE
4d95-cm2150c/D
6d125/6d140/6d170
B5.9g
C Gas plus/B Gas plus
C8.3g/L10G
Gas compression GTA3.9/5.9/8.3GC,
KTA19/38GC-CM556
ISB-CM2150D
ISB-CM2250
ISB-CM850
ISB Daimler Chrysler
ISB4.5/6.7 CM2150
ISB5.9G-CM2180
ISBe-CM850
ISBe-CM2150E
ISC-CM2150D
ISC-CM2250
ISC-Transit Bus ISL8.3-CM850
ISDe-CM2150C
ISF2.8-CM2220E
ISF2.8-CM2220S
ISF3.8-CM2220
ISF3.8-CM2220S
ISL-CM2150D
ISL-CM2250
ISL G-CM2180A
ISL8.9-CM850
ISLe4.5-CM2150E
ISM-CM870
ISM-CM875
ISM-CM876
ISM11 CM876
ISX-CM871
ISX11.9/15/16-CM2250
ISX/ISZ13-CM2150
L Gas Plus
PIM
QSB 6.7-CM2250
QSB 3.3-CM2150D
QSB4.5/5.9/6.7-CM850
QSB5/7-CM850
QSC8.3-CM2250
QSC8.3/QSL9
QSK19-CM850/CM2150
QSK19/23/45/60/78
QSK19G/45G/60G,QSV81/91
QSK23-CM500
QSK38-CM850/CM2150
QSK50/60-CM850/CM2150
QSL 9-CM2250
QSL9-CM850
QSM11-CM876
QST30-CM552
QST30-CM850
QSX15
Signature/ISX-CM870
4,Perkins Engines
1000 (6 Cyl) / 6.354 Series
RA - 6.247 Series
RA - 6.247
T - 6.354 Series
SOS - 6.354 Standard Option Schemes
TC - 6.354
TD - H6.354
TE - T6.354
TF - HT6.354
TG - 6.354.1
TH - T6.354.1
TJ - 6.354.2
TK - C6.354.2
TP - T6.354.3
TR - 6.372
TT - TC6.354.1
TU - T6.354.4
TV - 6.372.4
TW - 6.354.4
TX - C6.354.4
TY - H6.354.4
TZ - HT6.354.4
Y - Phaser / 1006 Series
YA - 6.60
YB - T6.60
YC - C6.60
YD - CC6.60
YE - T6.60CC
YG - 6.601
YH - T6.601
YJ - CCA6.601
YK - CCW6.601
YS - Option Packs M225TI / M215C
1100 Series
D - 1100 Series 3 Cylinder
DC - 1103C-33
DD - 1103C-33T
DF - 1103B-33
DG - 1103B-33T
DJ - 1103A-33
DK -1103A-33T
R - 1100 Series 4 Cylinder
RE - 1104C-44
RF - 1104C-E44
RG - 1104C-44T
RH - 1104C-E44T
RJ - 1104C-44TA
RK - 1104C-E44TA
RR -1104A-44
RS -1104A-44T
RT -1104A-44TA
V - 1100 Series 6 Cylinder
VK - 1106-E60TA
P - 1100D Series 6 Cylinder
PJ - 1106D-E66TA
PO - Option Packs 1100 Series
N - 1100D Series 4 Cylinder ()
NH - 1104D-E44T ()
1300 / Peregrine Series
W - 1300 Series
WB - T6.466
WC - CC6.466
WD - T6.67
WE - CC6.67
WF - T6.76
WG - CC6.76
WH - T6.87
WJ - CC6.87
WK - UT6.76 HEUI
WL - UCC6.76 HEUI
WM - UT6.87 HEUI
WN - UCC6.87 HEUI
WO - 1300 Series Option Packs
WP - UT6.761(I) HEUI
WR - UT6.871(I) HEUI
WS - UCC6.871(I) HEUI
2000 / 3000 Series
4 - 3000 Series
S4B - 3008
S4C - 8M700 / 800TI Condor Marine
S4E - 3008 SI
6 - 3000 Series
6A - 3012
S6A - 3012
S6C - 3012
S6D - 3012
S6E - 3012 SI
8 - 2000 Series
8B - 2006
8C - Eagle / 2006
8D - Drops / 2006
8G - 2006 SI
S8B - 2006
S8C - Eagle / 2006
S8D - Drops / 2006
S8E - 2006 SI
S - 2000 / 3000 Series
SAA - E300TX Euro1 Eagle
SAC - E335TX Euro1 Eagle
SAF - E375TX Euro1 Eagle
SAG - E400TX Euro1 Eagle
SAJ - E340TX Euro2
SAK - E380TX Euro2
SAL - E410TX Euro2
SGA - TAG1A Elektropak / Gen Sets
SGB - TAG2 Elektropak / Gen Sets
SGC - TAG2A Elektropak / Gen Sets
SGD - TAG3A Elektropak / Gen Sets
SGE - TAG4 Elektropak / Gen Sets
SGF - TG Elektropak / Gen Sets
SGG - TG1A Elektropak / Gen Sets
SGH - TG2A Elektropak / Gen Sets
SGJ - TTAG Elektropak / Gen Sets
SGK - TWG2 Elektropak / Gen Sets
SGM - TAG5 Elektropak / Gen Sets
SGN - TAG2B Elektropak / Gen Sets
SGP - TAG1B Elektropak / Gen Sets
SHA - 2006 TWH
SIA - SI Combined Heat / Power
SIB - SI Combined Heat / Power
SIC - TSI Combined Heat / Power
SID - TSI Combined Heat / Power
SMA - M600TI Condor Marine
SMB - M700TI Condor Marine
SMC - M800TI Condor Marine
SMO - M600/700/800 Duffield Opt Kit
SPA - Industrial 17T
SPB - Industrial 12T1
SPC - Industrial 12T2
SPD - Industrial 12TA
SPM - Industrial 12TW
SPN - Industrial 26TW1
SXA - Prototype
SXD - Prototype
SXG – Prototype
SXI - Prototype
SXM - Prototype
SXP - Prototype
2300 / 2800 Series
2300 - 6 Cylinder
FGA - 14L TAG1 Generating Sets
FGB - 14L TAG2 Generating Sets
FGD - 14L TAG3 Generating Sets
2800 - 6 Cylinder
HGA - 16L TAG1 Generating Sets
HGB - 16L TAG2 Generating Sets
JGA - 18L TAG1 Generating Sets
JGB - 18L TAG2 Generating Sets
JGD
4000 Series
D - 4000 Series
DGA - TAG1 Generating Sets
DGB - TAG2 Generating Sets
DGD - TAG3 Generating Sets
DGE - TAG4 Generating Sets
DGF - TG Generating Sets
DGK - TWG2 Generating Sets
DGL - TAG Generating Sets
DGM - TWG Generating Sets
DGN - TWG3 Generating Sets
DGP - TEG Generating Sets
DGR - TEG2 Generating Sets
DGS - TEG3 Generating Sets
DGV - TWG2C Generating Sets
DIE - TESI Combined Heat / Power
DIF - TESI Gas Unit
DIG - 4016E61TRS
DME - Seaking – Marine
Supported Transmission &Brakes
1,Meritor WABCO toolbox
D and E Versions ,HABS, hpb, ESC, RSC, ECAS
2,Bendix? ACom? Diagnostics
EC-17T, Generation 4 and 5, EC-30T, EC-60T (standard, premium and advanced), A-18T,MC-30T and the trailer antilock braking TABS-6 unit
3, Meritor ZF
4,Eaton Service Ranger
Vorad VS-400 Collision Warning System
Generation 2 Auto shift and Ultra shift Transmissions
Generation 3 Auto shift and Ultra shift Transmissions
Ultra Shift PLUS Transmissions
Lightning Transmissions
Hybrid Drivetrain Systems
5,Allison DOC
Allison1000,2000,3000,4000,
Cec2-5610,6610,8610,9610
CEC-MTB600,CLBT-V,HT700,B700
CEC-5,CEC-6,CEC-8,CEC9000
Support more software update !!!
| | |
| Monday, 26 December 2011 Year |
|---|
| 11:02 | Free download: vag km+immo tool V1.7.3 beta | |
| Free download: vag km+immo tool V1.7.3 beta
vag km+immo tool V1.7.3 advantages:
Fix bug of change km on A4.
Fix bug of communication with car.
Please take easy to download our UOBD2 available attachments, these downloading link don’t contains attacking virus, they are safe to your computer. If the anti-virus software test any of our attachment (especially .exe .zip .rar) containing virus, take easy, please uninstall or exit anti-virus software before download files, otherwise these .exe .zip
| | |
| Saturday, 24 December 2011 Year |
|---|
| 03:05 | Toyota IT2 doesn't support diagnosis for Suzuki? | |
| Toyota IT2 doesn't support diagnosis for Suzuki?
Q: I bought from uobd2 a Toyota tester IT2; it fails to work with my car s from 2000-2006 year, but works with the car models before 2000 year and that of after 2006 year
A: It depends on what car model, Toyota tester IT2 only works with Suzuki from North America market, not works with Suzuki from the other left market. Toyota IT2 works with most model of Toyota made after 2000 and Lexus.
Q: But my car model is Toyota, why it can't work?
A: I send you Toyota IT2 software version 2010, you have a try.
Q: yeah, I receive it, but still not work, why?????
A: OK, I send you software version 2011.
Q: yeah, it works now.
Send trackbacks to:
http://www.uobd2.com/blog/2011/12/toyota-it2-doesnt-support-diagnosis-for-suzuki/
| | |
| Wednesday, 21 December 2011 Year |
|---|
| 09:19 | Download BMW ICOM software ISTA/D (ISID 2.28) ISTA/P (ISSS 2 | |
| Download BMW ICOM software ISTA/D (ISID 2.2 ISTA/P (ISSS 2.43)
Several weeks ago, UOBD2.COM website promotes a new product named BMW ICOM ISIS ISID ABC, which is a replacement of DIS GT1/SSS/OPS/OPPS.
However, UOBD2.COM website make a note reading BMW ICOM ISIS ISID ABC doesn't contain software, advice any user who bought BMW ICOM buy BMW ICOM software from BMW Company… what do you think? I agree most users will be hesitated to buy BMW ICOM, because it contains no software.
[img]/http://www.uobd2.com/blog/wp-content/uploads/2011/12/bmw-icom.gif[img]
Today, UOBD2.com website begins to sell BMW ICOM software named "BMW ICOM Software ISTA/D(ISID 2. 2 ISTA/P(ISSS 2. 43)"
You can't even wait to check what ISTA/D(ISID 2. 2 ISTA/P(ISSS 2. 43) can do? Let's have a check at the first glance.
ISTA/D(ISID 2. 2 ISTA/P(ISSS 2. 43) Features:
Works together with BMW ICOM ISIS ISID A+B+C, can’t works alone.
Supports windows XP, windows 7, 64 bit, advice you use windows 7, 64 bit
available with ISTA/D and ISTA/P
Offline diagnose and coding
ISTA/D version: ISID2. 28
ISTA/P version: ISSS 2. 43(offline coding)
run in VWMARE(Virtual Machine).
Available with Language: English
do not support online update.
Send trackback to:
http://www.uobd2.com/blog/2011/12/where-to-buy-bmw-icom-software-istad-isid-2-28-istap-isss-2-43-xx008/
| | |
| Tuesday, 20 December 2011 Year |
|---|
| 03:48 | Digimaster 3 black / white screen? How to fix it? | |
| Digimaster 3 black / white screen? How to fix it?
Update kernel of digimaster 3 was newly added(one key through updating kernel by SD card),we made some modification on EBBOOT program.
Update EBOOT
Press button number 8 and click button OK at the same time, then “Press OK to confirm, and if the button “continue update Firmware” appears, it means your device EBOOT program is old version, you need to firstly update EBOOT program and choose a convenient way to update Digimaster 3 kernel.
Digimaster 3 update kernel
After update EBOOT, it is necessary to update kernel.
Tips: Before update EBOOT, please instal D3 TOOL first.
Step 1: Press button number 8 and button OK at the same time, and turn the power on. When you see “Press OK to confirm and continue update Firmware” press OK, then it enter the procedure of updating.
Step 2: Connect D3 with a computer through Mini USB (purple color), you can see a tip "Found New Hardware wizard".As the image shown below.
Step 3: choose "install the software automatically", click "click"
Step 4: If DIGIMASTER 3 have been installed already, choose the second “SEC SOC SMDK Board” in dialog box as shown below, and click "Next" to complete driver installation.
Step 5:Double-click Digimaster 3 PC Tools and choose "Kernel Update".
Step 6: Make sure the purple Mini USB is connected, then you can see " USB connect succeed"
Step 7: click "Kernel Update" and choose "EBOOT_20110427.bin" then click "OK" to start EBOOT program update.
Step 8: After 10sec. the DIGIMASTER 3 screen appears a twinkling red 'YH' logo which means EBOOT update is complete.
After update EBOOT successfully, please turn the power off and choose an appropriate way to update the kernel.
TIPS: Please unload the anti-virus software and firewall temporarily in order to run the software normally.
Send trackback to:
http://www.uobd2.com/blog/2011/12/digimaster-3-black-white-screen-how-to-fix/
| | |
|
|
Register | 
Log in 
Profile 
Private Message 
Guest book 
Photo albums 
